Square measuring carbon and silicon content thermal analysis cup to measure carbon and silicon content in iron casting industry
Basic Info
Model No.: Oliter-C
Product Description
1.Introduction of our product
- Tianjin AOLITE Thermal Analysis Cup are used matching with the carbon and sulphur analyzer to quickly analyze carbon content, silicon content and carbon equivalent in molten iron, which can save smelting time of molten iron, greatly reduce production cycle of white and grey cast iron and therefore increase production efficiency.
- Principle of measurement: Collection of temperature curves is conducted by microprocessor. Contents of carbon and silicon, and quality of molten iron can be calculated by crystallization process of molten iron.
2.Specification
| Item | Information |
| Shape of carbon cup | Square or round |
| Special Thermocouple tolerance | ±10℃ at 1200℃ |
| Moisture content | 0.50% |
| Resin content | 3.50% |
| High grade silica sand | (AFS 75-80 ) - 100 Parts |
| Core hardness | 80-100 CHN |
| Temperature range | 1250℃~1370℃ |
| Measuring range | carbon equivalent 2.5~5.0±0.047% |
| Carbon content | 2.1~4.2±0.039% |
| Silicon content | 0~20±0.1% |
| Graduation No. of supporting thermocouple wires | K type |
| Measurement function | thermal analysis cup towards cast iron |
| Measuring time | 240 seconds at most |
| Shelf Life | 6 Months min |
| Product ingredients | Resin coated sand |
| Straight Quartz tube | |
| T1 & T2 Thermocouple wires | |
| Sealing cement |
3.Method of using of Thermal Analysis cup
- Make the Carbon Cup put in the cup base with the positive and negative electrode correctly installed, when the green light on the carbon and silicon analyzer is on.
- Make a spoon of clean molten iron in carbon cup. It is better to make sure temperature of molten iron is 50-100 ℃ higher than liquidus temperature. If temperature of molten iron is too low, liquidus temperature cannot be measured; if temperature of molten iron is too high, it is likely to fuse the Thermocouple Wire. It is required that injected amount of molten iron is nearly 90-100% of the carbon cup. If injected amount is too little, temperature platform will become steep and thus correct feature points cannot be recognized; if injected amount is too much, molten iron will spill out, additives in carbon cups measuring components and performance of molten iron will lose and thus the carbon cup will not work. At this time, green light on the carbon and silicon analyzer is off and yellow light is on.
- In about 4 minutes, yellow light is off, red light is on, measurement finishes and measured data will be shown on the screen and in the meantime analytical data can be printed. After once measurement, the carbon cup used should be taken down as soon as possible, which can avoid temperature rise of the cup base influences subsequent measurement accuracy.
4.Company Information for thermal analysis cup
Tianjin Oliter Group was established in 1995,which includes 5 subsidiaries, Oliter Yuanbaoshan Metallurgical Industry Co., Ltd ,Oliter friend Metallurgical Equipment Co., Ltd,Oliter Jun Cheng Logistics Co., Ltd,Oliter auto repair Co. Ltd and Oliter Yu Hao Refractories Co. Ltd.We have employed 260 workers and our factory covers 9,000 square meters,with the annual output 100 million pieces, we own modern production lines and high quality controlling equipment with scientific administration, professional engineers, highly trained technicians and skilled workers. As all of the product materials are made and inspected by our factory, then the price icould be offered in lowest position and quality in best assurance.
5.Our Factory of thermal analysis cup
The Disposable Thermocouple factory address is selected in scenic suburb, in this way, we could protect environment and offer more jod post for many people.
6.Our Equipment and Artworks
we own modern Disposable thermocouple production lines and high quality controlling equipment with scientific administration, professional engineers, highly trained technicians and skilled workers
7.Packaging and Shipping for thermal analysis cup
All of the products ,include thermocouple,sampler, Oxygen Probe and carbon cup, which will be inspected and tested again and again, until make sure all of the good could be packed, each one will be packed in one plastic bag and put 20 or 30 in one carton, which all totally up to you guys, and delivered by our own logistics to airport or port on time.
8.Our TUV and Export Expert certificates
9.Customers visiting of thermal analysis cup
thermal analysis cup
Contact us if you need more details on Thermal Analysis Cup. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Thermal Analysis Cup、Thermal Analysis Cup. If these products fail to match your need, please contact us and we would like to provide relevant information.Product Categories : Metallurgical Steel Sensor Materials > Carbon Cup
Premium Related Products
